Hint: Pick the socks you want to hike in first, and then take them to the store to get the boots fitted with them.
Topics: (click on the topic to advance to the appropriate section)
| Picking Your Boots | Waterproofing Your Boots |
(Taken from an article where several manufacturers had endorsed this write-up as a valuable aid in selecting a pair of well-fitting hiking boots.)
What's the big deal about boots? Jeez, they're expensive, aren't they? Most look like they could take you up the north face of Everest. Do you really need such an expensive item to start out? I would say, "Yes". There are a number of good reasons to buy a pair of those "heavy" hiking boots. Boots are built sturdy to protect your feet. They accomplish this protection in a number of different ways. Good boots are "solid" on the bottom. You shouldn't be able to feel rocks or stones through the soles. If you can, there's a good likelihood that after many miles on the trail, your feet are going to start hurting. If you can press in the bottom of the sole with your thumb, the soles are probably too soft to give your foot proper protection. If you can "twist" the soles of the boot, it's also probably too soft. Trails are not like the pavement in front of your home. Trails are rocky, and you need good protection to avoid bruising the bottom of you feet. Good boots provide good protection on the sides. They are heavy because they either have extra padding to protect your foot from stones, rocks, and branches you may step on which could gouge into the side of the boot. Some fabric boots have protective "welts" 1/2-inch or more up from the soles to give added protection. Good boots provide good ankle support. Grab the top of the boot and try to bend it over side-ways. If it bends easily, it's probably not going to provide the level of protection needed on the trail. The top of the boot should be stiff to hold the ankle in place and provide it with good support. Good boots are either waterproof, or are capable of being waterproofed with special waterproofing solutions. I would avoid fabric boots that are not waterproof. While it's possible to treat non-waterproof fabric boots with liquid silicone, it generally doesn't waterproof the boot enough to be useful. Wet feet cause blisters. Stick with waterproofed fabric boots, or leather boots that can be waterproofed. (If the boot that ends up providing you with the "best fit" is a non-waterproof fabric boot, you can always buy a "Gore-tex" sock to put inside the boot to keep your feet dry. These socks are available from various outdoor mail-order merchants. So there is actually a work-around if need be.)
Good boots are heavy enough for their intended use. A "lighter" boot used for hiking may not have the necessary rigidly to provide your feet with good support under the heavier load of a backpack. If good boots are positively out of the question due to price, athletic shoes may be an option. But keep in mind that people have severely sprained ankles in athletic shoes, or in some cases, broken ankles in athletic shoes. Athletic shoes cannot be waterproofed either. Also keep in mind that there are many different types of athletic shoes, and some may be better suited to their original design (such as running) than use as a hiking boot. Calf-high work boots are a better option, but they generally aren't as comfortable as a hiking boot, can rub the Achilles tendon, and don't provide the kind of fit desirable for hiking. I recommend that you make the boot investment. Because even if you decide backpacking is not your thing, you can always wear the boots when you hike, shovel snow in winter, or mow the lawn in the summer. Your investment ultimately won't go to waste.
"Well I have an old pair in the closet that I bought about 15 years ago, I'll just use those!" Think again. Feet change over time. All those days your feet have been wedged into your favorite pair of Florsheims, Hush Puppies, or Nikes has caused them to change shape over time. Wear old boots on a long hike before you attempt a backpacking trip. You'll probably end up buying a new pair. "What's a good brand to buy?" - Anyone who tells you that "you should buy [insert your favorite company name here] brand boots" doesn't know what he or she is talking about. On the flip side of the coin, anyone who asks "What boots should I buy?" is also asking the wrong question. The best boot for you, and the one you should buy, is the one that fits YOUR foot. It's really pretty simple. If it doesn't fit your foot, you shouldn't buy it. It may work GREAT for your friend's foot, and he may think XYZ Brand was forged by the right hand of God, but if they turn you into a ripple five miles down the trail, then what good are they? Why doesn't your friend's boot work for you? Because all boots are made on different "lasts". The last is the "form" the boot is built around at the factory. The size and shape of these lasts, even between identical sizes of boots, can vary greatly. For instance, some boots are built around a "European" last. This last is typically narrow in the front, which can cause some American toes to feel pinched, but may feel great to a European. Asolo brand boots are built on American-style lasts. Does that mean you should buy Asolo because you're an American? The answer is "NO". Why? No two feet are alike. All come in different shapes. The best boot to buy is always the boot that fits YOUR foot. The two questions you should really ask are:
Unfortunately, the answer to the first question can only be supplied by one
person - YOU. The salesman can't help you with this. No one in rec.backcountry
can either. You have to let your feet "talk to you" on the matter.
Fortunately, many outdoor shops understand this, and are willing to let you
wear the boots inside your home to try them out. If they don't fit, they can be
returned for a full refund, provided they are in "new" condition. If
you decide to venture outdoors and wedge dirt in the lug soles or dirty the
bottoms of the soles, your outdoor merchant will probably refuse to take them
back. Check with your merchant first to
verify he has a "wear at home" policy before you buy. If he doesn't,
buy your boots somewhere else. Even if your boots feel good at home, there's
never an absolute guarantee that they'll feel great on the trail. But there's a
way to minimize this possibility - by getting an answer to the second question,
which I'll
supply here.
Finding your "Golden Slipper"
When shopping for new boots, I would recommend that you stay away from boot
brands made for hunters (high-top boots) or those sold through shoe stores.
"Hunting" boots generally go too high on the ankle, putting
unnecessary stress on the Achilles tendon. "Shoe Store" boots are
usually enhanced versions of street shoes. They "look" rugged, but
they're probably not going to feel very good five miles down the trail. Shop at
a reputable outdoor shop that specializes in hiking and backpacking equipment.
These shops generally carry well-designed outdoor footwear for the
hiker/backpacker.
A boot that fits well will not slip in the heel area, and provides your toes with plenty of room in the front when you're going downhill with a full pack load. For this reason, hiking boots are generally sized a little longer than your standard street shoe. Before you head to your local outdoor shop, grab the socks that you intend to wear in the boots. For beginners, I recommend that two pair be worn - a thin or lightweight pair on the inside, and a thicker pair on the outside. Two socks rub against each other, whereas one sock generally rubs against your foot, potentially raising blisters. Ideally, the socks should be synthetic or wool. Cotton socks get damp and soggy, and will raise blisters on your feet. Synthetic and wool socks do a much better job of wicking moisture away from your feet, thereby keeping them relatively dry.
In the Store
Choosing a well-designed boot with the right fit is the greatest challenge in
reviewing your boot choices. Don't let the rugged appearance of the
boot, the salesman's recommendation, or even the brand name steer you to a boot
that won't work for you foot. After you have reviewed your choices and
"tested" each boot design for sole and ankle rigidity (see the points
outlined above), ask the salesman to bring you a pair. The Finger Test. This is
where you'll perform your first "test". With the boot fully unlaced,
move your foot as far forward in the boot as possible. If the boot is the
proper size for your feet, you should be able to slip your index finger down
inside the boot at the back of the ankle. Your finger is just about the right
size for determining if that all-important extra space is available in the
front. The extra space is needed when backpacking downhill, when your foot has
a tendency to slide forward in the boot under load.
The Sensory Test
Next, take off your socks and slip your bare foot into the boot. Using all
your sensory powers, try to determine if any part of the boot feels tight.
This is especially important in the area where the small toes are located.
Some boots may be designed in such a way that your small toes will feel "pinched"
or jammed". This can be very difficult to feel through two pairs of socks.
The bare foot test will bring all this to light. Does the boot feel too narrow
on the sides in the area just behind your toes (the "ball" of the
foot)? Is it too tight in the middle part of your foot on either side of the
arch? If so, look for another boot. The "bare foot" test will quickly
eliminate any boots that are clearly not designed for your foot. Now perform
the same sensory tests with your socks on. Make sure your socks are stretched
smoothly over your foot, not loose, which can cause the sock to fold over
when you slide your foot into the boot. The boot should not feel tight in
any area. Inversely, it shouldn't feet loose in any area either. It should
fit comfortably "snug". If any part of your foot feels "jammed",
try a lighter, medium-weight sock on the outside. (Using different thicknesses
of socks can always be used as an option for making size/fit adjustments.)
If the foot still feels jammed (or inversely, loose), look for another boot.
Women should pay close attention to comfort in the width of the boot. Some
women may be used to tight-fitting street shoes. If a tight-fitting pair of
hiking boots are purchased, this can lead to problems later on. Wide feet
wedged into tight boots can eventually cause the boot leather or fabric to
relax and stretch, allowing the foot to extend beyond the sole of the boot.
This can lead to increased stress on the body as the hiker works to maintain
balance on a shoe platform that is too small for the foot. In more severe
cases, the edge of the sole can dig into the bottom of the foot through the
boot leather/fabric, leading to foot bruises and blisters. The "paper
doll" test mentioned further on is highly recommended.
Women who have very wide feet might want to consider a men's boot. As a guide, a women's "D" width is generally a men's "C" width. Be sure to play close attention to the heel area of the boot if you decide to try men's boots, because women have narrower heels.
The Stride Test
Walk around in the boots. Do they feel good? Does the boot "break"
(or crease) across the top of the toes comfortably when you stride forward? If
the top of the boot feels like it's jamming the back of your toes when you
stride forward, then look for another pair. What about the heel? If you feel
your heel sliding noticeably in the heel area, you probably have a boot that's
a little too large, or one that's not going to work for you. New, rigid boots
will always cause your heel to slide a little (and I emphasize, a little) when
they're new, due to the newness and stiffness of the sole. If you think the
sliding is due to a boot that's too large, go 1/2-size smaller, ensuring that the
smaller size passes the "finger test".
The Slant Board Test
If everything still feels okay, ask the salesman if they have an "slant
board" where you can test how they feel on an incline. Walk down the
incline. If your foot jams into the front of the boot and your toes feels
pinched, look for another pair. If your toes touch the end of the boot, ask the
salesman for the next half-size larger. If you've managed to locate a pair that
meets all the criteria above, there's a good chance that you've found a reasonably
good fit for your foot. If you haven't, keep trying on different brands until
you find a pair that "makes the grade" so to speak. If none of the
boots available meet the criteria, visit another outdoor shop. Boots can be
expensive. Take the time to choose wisely. Your bank account and feet depend on
it.
At Home - The "Paper Doll" Test
Once you have your boots home, slip on the socks you intend to wear while
you're hiking. Then, place a blank sheet of paper under your foot, and
carefully trace an outline of your foot with a pencil. Using scissors, cut the
foot outline from the paper. Then, very gently, slide your "foot
cut-out" into the boot. Press the paper flat onto the bottom of the boot,
working the paper into all corners of the boot, just as you would press pizza
dough into the corner of a cookie sheet. Then, remove the cutout. Any spot
where the paper is folded up (i.e. not flat) is a spot where the boot is tight.
Now remember, some snugness is okay, but if you have spots where the paper is
folded up 1/2", you may well have some problems later on down the trail.
The Long Walk Test
Next, wear them around and see how they feel. I would recommend that you
perform a "long walk" inside your home, or even better, inside a
local shopping mall to see how they feel after a little distance. Wearing them
while lounging at home will not give them the proper test. Put a little
"indoor distance" on the boot. If they still feel good, you've found
a reasonably good boot for your foot. If they don't feel good, resist the
temptation to keep them - take them back and keep looking.
On the Trail - Break-in
Assuming that you've found your "golden slipper", the final step is
breaking in your boots before you take them out on the trail. With the
evolution of fabric Gore-tex boots, this is not as great a factor as it used to
be, but should still be performed. All-leather boots will definitely require
some break-in time prior to backpacking. Wear your boots on progressively
longer hikes until you're certain you can do some comfortable distance with the
added weight of a backpack.
Being Prepared for Problems Finally, even the best fitting boots can still
cause you problems. Small spots may rub, or tender feet may require some
toughening. Be sure to take along some "moleskin" on your hikes and
backpacking trips. Moleskin, and other similarly designed abrasion padding with
adhesive on one side, and a felt-like padding on the other, will minimize the
possibility that blisters are raised. (It will minimize, not eliminate the possibility.)
Medical adhesive tape, with a smooth, slick covering on the outside can also be
used. Spenco "second skin" is also an outstanding option for
providing relief for boot "hot spots". Remember, sometimes it's your
foot that needs conditioning, not the boot. Regular hiking and backpacking will
help toughen your feet until they are prepared for the abuse you'll give them
on the trail.
When your feet stay dry in your boots, they are less likely to blister so you can enjoy your backpacking experience. Since it does rain, it is important to waterproof your boots. There are several good products out there and each one offers an advantage and disadvantage. Once applied to your boots, none of them last forever so regular maintenance will help your boots waterproofed at all times.
Start by giving your boots a light cleaning with mild soap and warm water. Let the boot dry completely and then waterproof with a minimum of two applications right away. If going to Philmont, then apply one or two more coats just before you leave.
Here are some products I have personally used and find them to do a good job:
Look for any of these products in the boot department of your local outdoor store. So here is a short briefing on each product. ALL products will change the color of leather and make it slightly darker.
Camp Dry is a clear liquid which is silicone based. It has
a applicator attached to the screw on cap. This is a decent product for just
about any type of leather and probably one of the better ones for boots with
nylon uppers. You simply apply it to your dry/clean boot with the applicator.
The biggest problem with this product is that it contains solvents that can
attack the glued seams of your boot. To prevent this, hold the boot upside
down while treating it so the solvents don't collect in the glued seams. Cost
is about $6 per bottle.
Snow Seal comes in two flavors. One is oil/wax based and
the other is silicone based. Use the oil/wax based product only on all leather
boots. The silicone-based product can be used on leather and nylon uppers.
Both work best when the boot is warm to the touch. When using the wax, I prefer
to simply apply the wax and rub it in. Then, set them in warm sunshine for
a while, use a hair dryer or hold them over the stove to warm the boot. You
will see the the leather start to absorb the waterproofing better when it's
warm. If the boot is new, consider doing another layer. Cost is about $2 to
$4 depending on the product you buy and what size container. The down side
of this product is it can be a little messy to work with.
Nick Wax sells 3 flavors of waterproofing depending on what
type leather your boots are. Those are smooth finish leather, nubuck or suede
leather and fabric or fabric & leather combination boots. I've only used
the product for nubuck/suede leather. It calls for dampening the boot with
water before applying. Check the label for application instructions before
using. This is a water based silicone treatment. It won't hurt your boots.
The down side is that it is a bit more expensive than the others. Expect to
pay about $7-8 per bottle.
It is easy to tell when your waterproofing is effective. If you see beads
of water on the boot and it looks dry when walking in wet grass, then you
are fine. If the toes show dark leather that looks wet then it is time for
another application. You typically need to re-waterproof your boots every
other outing and likely every backpacking trip.